Required: Android O/S : 2.0.1+
Overview: BT Controller allows you to use android devices as gamepad controllers for any other android device.
For example, you can play a snes emulator on your tablet which is connected to a tv, using your phone as the controller. It also works the other way around, you can use your tablet as a controller for your phone or a phone as a controller for another phone etc.
Controllers are fully customizable and you can build your own controllers as well as submit them to Droidbean for others to download. Please send us your own creations using the submission button inside the app and we will review and add them to the controller download section.
As of v1.33 you can now add analog joysticks to controllers.
If the emulator supports it, you can use full analog mode (360 degree rotation with sensitivity / strength based on distance from centre). Currently this includes any mupen based N64 emulator (Eg: Mupen64PLus, AE)
Multiplayer support is also possible if the emulator supports it. You must connect additional devices using the connect button from the new controller and not from the host device.
Controller builder / editor
Download custom controllers
All hardware keys from controller are sent to host so you can control volume etc.
You can check out more instructional videos on our website:
Please Note: BT Controller only works with emulators and games that support custom input configurations.
If you experience slow performance, please ensure all other bluetooth accessories are turned off or disconnected as they may interfere.
Emulators/Games working with BT Controller:
Sonic4 Episode 1 & 2
Mupen64Plus, AE [N64] - Full 360 degree joystick support and up to 4 players multiplayer support
Tiger Arcade [CPS2]
If you are unable to watch the youtube video demonstration and instructions you can try to setup BT Controller by following these steps:
Open BT Controller on both devices
Allow bluetooth to turn on by pressing 'Yes' at the prompt
Set one device as visible if you have never connected these devices via bluetooth before (you can do this by pressing the 'Visible' button
Press the connect button on the other device (the one that was not made visible) and then press scan to locate your other device
Once the device comes up in the list select it to connect
Once the devices have connected you will be given the option to select the purpose of the device. Select 'Host' if the device is going to run the emulator or 'Controller' if you plan to use this device as a gamepad
The other device will automatically switch to the appropriate purpose
Connect any additional devices by connecting from the controllers to the host, you can not connect from the host to a new controller.
On the Host, you will need to do 2 things. Enabled the BT Controller Keyboard and Set the BT Controller as active.
A checklist will appear in the top right corner for the host device.
You can click the check boxes to bring up the relevant setting screen to enable and activate the BT Controller keyboard
Once both have been set correctly the checklist will show you the controller device's input for testing. If the input is working correctly you can close the overlay and open up your emulator or game that supports custom input.
Navigate to the input configuration for your emulator or game and set up each button (Key mappings in snesoid, you also need to enable the custom input option in "Other settings".
Start a game/rom
What's in this version : (Updated : Aug 4, 2012)
Multiplayer support (Additional controllers must connect to the host)
Custom joystick codes (double tap joystick tile in edit mode)
Full btcontroller keyboard on host
Reset helper screens in settings
Controler Builder: Button to assign all remaining tile keycodes
Corrected Joystick resizing for different screens
Download: Released by chathu_ac